Ranco

Lightweight LW Series Bottom Dump Trailers

Six Different Lengths: 28 ft., 35 ft., 37 ft., 40 ft., 42 ft., & 44 ft.

1. Two Capacities: 19 Cubic Yard or 21 Cubic Yard
2. H-9700 Suspension - Tandem or Tri-axle Configuration - 3 Leaf or Single Leaf Springs
3. Dual or Single Tire Configuration on Steel or Aluminum Wheels: PSI -Air System Available
4. Upper Hopper Sheeting: AR-250 10 gauge, 12 gauge or 14 gauge - Insulated or Non-Insulated
5. Lower Hopper Opening: 50" x 90" or 60" x 108" - Insulated or Non-Insulated
6. Gate Face Material: AR-250 10 gauge or 12 gauge
7. Lower Hopper Extensions: Reinforced Steel or Rubber
8. Gate Seals: Steel and/or Rubber
9. Gate Controls: Four (4) Different Brands
10. Parking Legs: Telescoping or Removable
11. Bolt On Fiberglass Front Fenders: Standard, Extended or None
12. Windrow Deflectors
13. Top-Offs: Aluminum, Steel or Wood in 3 Different Heights
14. Tarps: Sliding or Flip Type
15. Special Paint to Match Your Truck

Ranco Premier Series Features:

1. Rubber Bushed Oscillating King Pin Plate - Never needs grease!
2. Bolt on Rear Fenders - Easy to repair!
3. 7" OR 8" Gate Cylinders - Plenty of Opening Power
4. Filter and Lubricator in Protected Location
5. Pin Setting Gate Equalizers - No Chains to fool with
6. 22,500 Ib. 5" Tubular Axles with Stemco Oil Seals
7. Outboard Hub-Piloted Hubs with Centrifuge Drums
8. 161/2x7" Air Brakes with Automatic Slack Adjusters
9. 16 ply Radial Tires
10. 4S-2M ABS Brake System
11. Circuit Breaker Protected Sealed Beam Lights
12. Wiring in Loom and Enclosed in Trailer Frame
13. Sealed Document Holder

    ---

FRAMELESS ANVIL SERIES END DUMP TRAILERS

Anvil Frameless Standard Components:

• Parking Legs: Adjustable mounted on draft arms
• Truss Design Draft Arms, 3" x 4" -- 76" Wide at Hinge
• Bolt-On Front and Rear Fenders
• Tarp Hooks on Both Sides
• Front Mounted Ladder
• High Lift Tailgate:- 76" Clearance between raised gate & body

OR

• Combination Gravity Lift and Barn Type Door
• Hutchens H-903, 50,000 Ib. Single Point Suspension
• Rockwell 25,000 Ib. 5" Tubular Axle w/ Stemco Seals
• 16.5" x 7" Air Brakes w/ Auto Slack Adjusters
• Rockwell-Wabco ABS Brake System
• Outboard Hubs w/ Centrifuse Drums
• 8.25 x 24.5 Steel Disc Wheels
• 11R x 24.5
• Circuit Breaker Protected Sealed Beam Lights
• Wiring in Loom and Enclosed in Trailer Frame
• Sealed Document Holder Ranco Arctic White Paint

Optional Equipment:

• 54" High Sides* in Lieu of Standard 45"

* Adds .20 cu. yd. per foot of Tub Length 66" Side Height" in Lieu of 45" Standard Height 66" Side Height** Made out of 3/16" Sheets in Lieu of 1/4" Sheets

** 66" Side Height Adds .47 cu. yd. per foot of Tub Length Over
Standard 45' Side Height 5/16" Tub Sheeting in Lieu of Standard 1/4" 8" Side Board Brackets & Boards Air Ride -- Air Lift Third Axle Aluminum Hubs Aluminum Wheels Tarps -- All Types Special Paint

NEW SIDE DUMP TRAILERS

Ranco SD 22-40 Standard Components:

• Replaceable King Pin
• Parking Legs - Two Speed
• Bolt on Front and Rear Fenders
• Rockwell 25,000 lb. 5" Tubular Axel w/Stemco Seals
• 16.5" x 7" Air Brakes w/Auto Slack Adjusters
• Rockwell-Wabco ABS Brake System
• Outboard Hubs w/Centrifuge Drum
• 8.25 x 24.5 Steel Disc Wheels
• 11R x 24.5
• Circuit Breaker Protected Sealed Beam Lights
• Wiring in Loom and Enclosed in Trailer Frame
• Sealed Document Holder
• Ranco Artic White Paint
• 3/16" Tub Sheeting in Lieu of Standard 1/4"