| Wear bar - Material AR400 (non-reversible) |
1/4" x 5" |
1/4" x 5" |
1/4" x 5"
By using one plow to both push and stack tons of snow, you eliminate the need for multiple pieces of equipment at the job site. The patented, fold-back wing design lets you reduce the plow size by up to 50% for unsurpassed maneuverability, ease of transport, and when conditions call for a smaller plow size.
Up to 35 degree hydro-turning in both directions adds further flexibility and efficiency to your snow plowing. The Daniels Wing Plows are available in four sizes from 14 to 20 feet. Larger sizes built to order upon request. Daniels Wing Plows also are available with options such as the Patented Pusher Kit for better performance. Curb guards can also be added for durability. The Daniels Wing Plow also can be equipped to mount to virtually any machine with quick couplers for wheel loaders and skid steers, as well as tractors without a front end boom.
Standard Options
- Double-acting cylinders w/max. stroke at 35 degrees
- Cushioning Relief Valve
- Backing Plate and Standard Ears
- Double Wing Hinge Design
- Reversible Steel Wear Edges
- Full Moldboard Trip
Available Options
- Patented Pusher Kit
- Curb Guards
- Alternate Mounting Plates
- Skid Shoes
Wing Plow Specifications
| Model Number |
3414 |
3416 |
3418 |
3420 |
| Plow Width |
14' |
16' |
18' |
20' |
| Center Plow |
9' |
10' |
12' |
12' |
| Each Wing |
2'6" |
3' |
3' |
4' |
| Width Hydro-Turned with wings closed |
7'6" |
8'6" |
10'6" |
10'6" |
| Width Hydro-Turned with wings open |
11'6" |
13'1" |
14'8" |
16'4" |
| Plow Construction |
| Moldboard: |
| Material |
10 ga. |
10 ga. |
10 ga. |
10 ga. |
| Height |
34" |
34" |
34" |
34" |
| Vertical Reinforcing Ribs: |
| Material |
1/4" |
1/4" |
1/4" |
1/4" |
| Number |
11 |
11 |
13 |
13 |
| Hinged Tripping Points |
5 |
5 |
7 |
7 |
| King Pin Diameter |
2 1/2" |
2 1/2" |
2 1/2" |
2 1/2" |
| Trip Springs |
2 |
4 |
4 |
6 |
| Shipping Wt. (lbs.) |
2300 |
2500 |
2800 |
3100 |
Wear Edge
(Reversible) |
5/8" x 8" |
5/8" x 8" |
5/8" x 8" |
5/8" x 8" |
| Recommended Wheel Loader Size |
| 14' |
10,000 to 15,000 lbs. |
| 16' |
18,000 to 23,000 lbs. |
| 18' |
20,000 to 25,000 lbs. |
| 20' |
23,000 to 32,000 lbs. |
| Wing Plow with pusher kits add 3,000-5,000 lbs. |
Incredibly Efficient
Daniels Plows offers the industry's largest skid steer mounted snow plow. Built specifically for skid steers with 2 speed transmissions the Straight Blade will provide incredible high snow plowing efficiencies. Use one plow to both push and stack tons of snow, eliminating the need for multiple pieces of equipment. All 12' and 14' Daniels Straight Blades are standard with the Daniels Patented Pusher Kit, increasing productivity by up to 45%.
Standard Options:
- Double-acting cylinder with maximum stroke at 35 degrees.
- Cushioning Relief Valve
- 2 Pin Mounting Plate for Skid Steers
- Swivel Plate and pivoting backing plate
- Daniels Patented Pusher Kit on 12' and 14' models
- Reversible Steel Wear Edges
- Full Moldboard Trip
Available Options:
- Alternate Mounting Plates
- Curb Guards
Straight Blade Specifications
| Model Number |
2710 |
2712 |
2714 |
| Plow Width |
10' |
12' |
14' |
| Width Hydro-Turned |
8' 2" |
9' 10" |
11' 6" |
| Plow Construction |
| Moldboard: |
| Material |
10 ga. |
10 ga. |
10 ga. |
| Height |
27" |
27" |
27" |
| Vertical Reinforcing Ribs: |
| Material |
1/4" |
1/4" |
1/4" |
| Number |
7 |
9 |
11 |
| Hinged Tripping Points |
5 |
5 |
5 |
| Trip Springs |
3 |
4 |
4 |
| Shipping Weight |
1100 lb. |
1250 lb. |
1475 lb. |
Wear Edge - Reversible
(Two Sections) |
5/8" x 8" |
5/8" x 8" |
5/8" x 8" |
| Recommended Skid Steer Loader Size Chart |
| 10’ Straight Blade |
4,000 to 6,000 lbs. |
| 12’ Straight Blade |
6,000 to 8,000 lbs. |
| 14’ Straight Blade |
8,000 to 10,000 lbs. |
| 2 Speed Transmissions are recommended for all Skid Steer sizes |
|